Building Simple Corner Office Desks

Oct 25th

Corner office desks are also called a traditional desktop. It provides two work spaces for those who work in the office. Buying L-shaped corner tables can be an expensive transaction, because you pay for wood, design and often the brand. Building your own home can be done without breaking your budget. Additionally, a home-made design allows you to customize desk surfaces that suit your home office and room layout.

Corner Office Desks Wood
Corner Office Desks Wood

Instructions

12 Photos Gallery of: Building Simple Corner Office Desks

Image of: Corner Office Desks Wood
Image of: Corner Office Desks Wonderful
Image of: Corner Office Desks Small
Image of: Corner Office Desks Review
Image of: Corner Office Desks Plan
Image of: Corner Office Desks Modern
Image of: Corner Office Desks Large
Image of: Corner Office Desks Enchanting
Image of: Corner Office Desks Design
Image of: Corner Office Desks Contemporary
Image of: Corner Office Desks Computer
Image of: Corner Office Desks Brown
 

Place the tape measure horizontally on a wall that makes up the corner where you want to place the corner office desks. Determine how long you want a page of the L desktop to be and write the measurement down. Repeat this step with the other wall in the corner, so you have two custom dimensions. In addition, measure outwards from the walls to determine the desired width on the desktop. Lay down a plywood board. Draw a straight line on plywood using pen and ruler that measures the desired length of one side of the L-shaped desktop. From one end of the straight line draw a perpendicular line that measures the desired width.

Place a gradient on the other end of the horizontal straight line, opposite the vertical drawn line. Look up a 45 degree angle that leans toward the vertical line, and make a 45 degree mark pencil mark on gradient disc. Remove the gradient and take the ruler. Place the ruler at the end of the horizontal line so it is aligned with pencil marking, creating a 45 degree angle. Draw a straight line. In addition, another horizontal line joins the upper end of the vertical line and sloping 45 degree line to get the contours of one of the desk bits required. Repeat the entire procedure on a second piece of plywood, so you have two custom-designed corner office desks tops at a 45 degree angle.