Corner writing desk – Corner wall-mounted benches can make use of a space in the house that previously could have gone to floor surface. By installing a desktop, the desktop area is maximized without requiring a large amount of space in the room. Assembling a desktop drive can provide enough space for a computer workstation, as well as a place to keep household bills and other household goods companies. Use a table to saw 3 feet with 3m pieces 3/4 inch birch plywood at the top of the desk.
Set the guide on the table saw a 45 degree angle and cut the ends of the plywood that will meet in the corner. Take the time to ensure that the saw will decrease the 45 degree angle to the right direction. Slide a control detector along the wall 36 inches from the floor and indicate where the bolts are. Place the prepared pieces of the desk into the mounted shelf braces. Secure the corner writing desk and the angle shelf braces with 1/2 inch wood screws through the underside of the bar and into the underside of the desk top. Repeat this for all installed braces.
12 Photos Gallery of: DIY Wall Mounted Corner Writing Desk
Cut two 3-foot 2-inch casting and cut at a 45 degree angle at the ends that will meet on the corner of the desk. These pieces finish the appearance in front of the desktop. Cut two pieces of the 2 inch list that is 3 feet tall with a 45 degree angle cut at the end of the list that will be the opposite of the wall. These pieces will cover the ends of the table. Bite and attach cut pieces of casting with finishing nails to front edge desk with top of casting at even height at the top of the corner writing desk. For extra safety, that can be placed on the front of the table before attaching casting.