Moravian star ceiling light – Each bathroom requires lighting, but you must choose the right type of luminaire for each specific bathroom. Whether you design a new bathroom or remodeling an old one, choose a light that fits the available space and match the color and style of the bathroom. When installing the ceiling lamp, an assistant has with you to help keep the light up while attaching the wires. Take your time with the project, as there is an element of danger to work with electrical wiring.
12 Photos Gallery of: Moravian Star Ceiling Light In the Bathroom
Loosen the screws that connect the Moravian star ceiling light s rib to the electric box in the ceiling and lower the old luminaire from the ceiling. Use a contact-free voltage gauge over each wire in the cabinet to ensure all electricity until the bathroom is turned off. Turn the thread nuts counterclockwise to remove them, remove the old faucet all the time. Turn the power back to the bathroom at the breaker box and use the non-contact voltage gauge to make sure there is electricity going to the colored or hot wire in the cabinet.
Press both the hot wire and the metal case or ground wire with cables in a neon voltage tester. Turn the power to the bathroom off at the breaker box and attach the strap to the new light cap play. Screw the rib into the holes in the cabinet, secure it to the ceiling. Wrap the neutral wires from the box and Moravian star ceiling light together with a steel nut, and secure the hot wires with another thread nut. Twist the ground wire around the box earth screw clockwise several times. Tuck the cables into the hood, and then attach the fitting cap to the ceiling, with screws. Install any covers and bulbs needed in the new luminaire, and then turn the electricity to the bathroom again at the breaker box.